Maintenance Program
When it comes to HVAC equipment, many costly repairs can be avoided with proper preventative maintenance. Inspections alone don’t meet the maintenance requirements specified in your owner’s manual. Failing to address issues or remove debris and corrosion on a regular basis can negate your system’s warranty. With over 50 years of experience maintaining a variety of systems, J&J Heating and Air Conditioning Inc. has the knowledge and skill to ensure your equipment is properly maintained.
We achieve this through our 20-point maintenance program. When you enroll in the program, one of our skilled technicians will visit your home twice a year to perform a 20-point inspection and tune-up on all covered units. Cost varies based on number of units and type of equipment.
Maintenance Program Benefits
Those who enroll in our maintenance program experience a number of benefits, including:
- 10% discount on parts for additional work needed on equipment covered by your maintenance plan.
- Custom tailored plans to meet your specific cooling, gas furnace, heat pump, or gas boiler needs.
- Preferential customer status for service requests for both regular and emergency situations.
- More efficient equipment operation, which prolongs equipment life and curtails breakdowns.
- Early problem identification by our experienced technicians, helping to avoid costly repairs.
- Consultations with our technicians to discuss any problems that arise and seek your permission before proceeding to remedy any issue.
- Seasonal e-mails with coupons and tips to help you maximize your home’s energy efficiency.
- Consultation with technicians to discuss the need for humidification, dehumidification, and/or air purification.
20-Point Air Conditioning & Heating Equipment Tune-Up
Our annual maintenance visit always starts with a thorough cleaning and inspection of all covered units. Our technician will then perform the following 20-point tune-up:
Air Conditioning
- Check operating temperatures (evaporator temp drop)
- Check voltage of outdoor compressor
- Inspect motors and, if necessary, lubricate moving parts
- Clean or replace standard air filter
- Check low voltage wiring and contactor
- Clean & inspect condensate line
- Inspect condensate pump if applicable
- Check and, if needed, tighten all electrical connections
- Check for visible refrigerant leaks
- Check and, if necessary, adjust thermostat
- Test humidistat operation if applicable
- Test safety and control circuits for proper operation
- Test float switch if applicable
- Inspect electronic air cleaners if applicable
- Check temperature differential
- Check fan motor amperage draw
- Inspect service valves
- Check condenser coil and advise
- Check blower components
- Customer consultation on condition of equipment
Heating
- Perform heat exchanger inspection
- Clean and adjust all safety devices
- Inspect pilot and/or flame sensor
- Clean and inspect burners
- Inspect motor and, if necessary, lubricate moving parts
- Clean and/or replace 1″ standard filter as needed
- Check flue and venting
- Test for natural gas leaks around furnace
- Check blower compartment
- Check furnace for proper cycling
- Check and adjust thermostat if necessary
- Check and, if needed, tighten all electrical connections
- Clean & inspect condensate line
- Inspect condensate pump if applicable
- Inspect fan belt tension if applicable
- Check thermocouple if applicable
- Test ignition system for proper operation
- Measure blower motor amperage and voltage
- Test safety and control circuits for proper operation
- Customer consultation on condition of equipment
J&J Comfort Club
Want the next level of service? Our Comfort Club might be for you! Members of the Comfort Club become VIP Customers who will receive special pricing, enhanced benefits, and special promotions. There is a $300.00 membership fee when purchasing or renewing a 3-year maintenance contract. Comfort Club benefits include:
- $300.00 credit toward replacing or adding new equipment, up to a maximum $1,200.00 credit *
- No additional fee for emergency / afterhours calls
- 20% discount on replacement parts **
- 20% off Pull and Clean and Coil Cleaning Services
- Priority booking
- Optional automatic monthly payments ***
- Text message alerts for call booking, technician dispatching, and arrival
- Automatic notification for renewing contracts and memberships
- Equipment registration, if applicable
- Special members-only portal for tips, coupons, and special discounts
*Credit will apply towards a replacement or new installation of furnace, air conditioning, heat pump, humidifiers, IWave, air cleaners, dehumidifiers and special promotions.
** No repair work will be made without authorization. Equipment replacement not subject to discount.
*** Monthly payments will be set up as an automatic payment using a credit or debit card.
Please note: Boiler agreements are not eligible for Comfort Club membership and accrued credits expire three years after expiration of last maintenance agreement and must be used within our service area.
Maintenance Program Benefits
Those who enroll in our maintenance program experience a number of benefits, including:
- 10% discount on parts for additional work needed on equipment covered by your maintenance plan.
- Custom tailored plans to meet your specific cooling, gas furnace, heat pump, or gas boiler needs.
- Preferential customer status for service requests for both regular and emergency situations.
- More efficient equipment operation, which prolongs equipment life and curtails breakdowns.
- Early problem identification by our experienced technicians, helping to avoid costly repairs.
- Consultations with our technicians to discuss any problems that arise and seek your permission before proceeding to remedy any issue.
- Seasonal e-mails with coupons and tips to help you maximize your home’s energy efficiency.
- Consultation with technicians to discuss the need for humidification, dehumidification, and/or air purification.
20-Point Air Conditioning &
Heating Equipment Tune-Up
Heating Equipment Tune-Up
Our annual maintenance visit always starts with a thorough cleaning and inspection of all covered units. Our technician will then perform the following 20-point tune-up:
Air Conditioning
- Check operating temperatures (evaporator temp drop)
- Check voltage of outdoor compressor
- Inspect motors and, if necessary, lubricate moving parts
- Clean or replace standard air filter
- Check low voltage wiring and contactor
- Clean & inspect condensate line
- Inspect condensate pump if applicable
- Check and, if needed, tighten all electrical connections
- Check for visible refrigerant leaks
- Check and, if necessary, adjust thermostat
- Test humidistat operation if applicable
- Test safety and control circuits for proper operation
- Test float switch if applicable
- Inspect electronic air cleaners if applicable
- Check temperature differential
- Check fan motor amperage draw
- Inspect service valves
- Check condenser coil and advise
- Check blower components
- Customer consultation on condition of equipment
Heating
- Perform heat exchanger inspection
- Clean and adjust all safety devices
- Inspect pilot and/or flame sensor
- Clean and inspect burners
- Inspect motor and, if necessary, lubricate moving parts
- Clean and/or replace 1″ standard filter as needed
- Check flue and venting
- Test for natural gas leaks around furnace
- Check blower compartment
- Check furnace for proper cycling
- Check and adjust thermostat if necessary
- Check and, if needed, tighten all electrical connections
- Clean & inspect condensate line
- Inspect condensate pump if applicable
- Inspect fan belt tension if applicable
- Check thermocouple if applicable
- Test ignition system for proper operation
- Measure blower motor amperage and voltage
- Test safety and control circuits for proper operation
- Customer consultation on condition of equipment
J&J Comfort Club
Want the next level of service? Our Comfort Club might be for you! Members of the Comfort Club become VIP Customers who will receive special pricing, enhanced benefits, and special promotions. There is a $300.00 membership fee when purchasing or renewing a 3-year maintenance contract. Comfort Club benefits include:
- $300.00 credit toward replacing or adding new equipment, up to a maximum $1,200.00 credit *
- No additional fee for emergency / afterhours calls
- 20% discount on replacement parts **
- 20% off Pull and Clean and Coil Cleaning Services
- Priority booking
- Optional automatic monthly payments ***
- Text message alerts for call booking, technician dispatching, and arrival
- Automatic notification for renewing contracts and memberships
- Equipment registration, if applicable
- Special members-only portal for tips, coupons, and special discounts
*Credit will apply towards a replacement or new installation of furnace, air conditioning, heat pump, humidifiers, IWave, air cleaners, dehumidifiers and special promotions.
** No repair work will be made without authorization. Equipment replacement not subject to discount.
*** Monthly payments will be set up as an automatic payment using a credit or debit card.
Please note: Boiler agreements are not eligible for Comfort Club membership and accrued credits expire three years after expiration of last maintenance agreement and must be used within our service area.
Contact Us Today to Discuss Enrolling in Our Maintenance Program!